Hello All,
I am currently importing datarows into a sql 2000 database. when I use my
stored procedure which contains sp_xml_preparedocument... and FROM OPENXML,
I get the error stated above in the subject heading.
In reading other websites I have found that the error above:
An invalid character was found in text content.
You will get this error message if a character in the XML document does not
match the encoding attribute. Normally you will get this error message if
your XML document contains "foreign" characters, and the file was saved with
a single-byte encoding editor like Notepad, and no encoding attribute was
specified.
The actual error is:
Server: Msg 6603, Level 16, State 1, Procedure sp_xml_preparedocument, Line 15
XML parsing error: An Invalid character was found in text content.
Based on what I found on the other webisite, the only foreign character in
my data the è in ARKTX="XXX CRèME 1x20 KG".
Is there anyway to encode this character so I do not get a parsing error?
Thank you in advance
Eric
I found that I have to place an xml declaration
of
<?xml version="1.0" encoding="ISO-8859-1"?>
in my XML string so the sp_xml_prepared_Document stored procedure will treat
the data as UTF-8 and not the Database's code page.
"E-Cube" wrote:
> Hello All,
> I am currently importing datarows into a sql 2000 database. when I use my
> stored procedure which contains sp_xml_preparedocument... and FROM OPENXML,
> I get the error stated above in the subject heading.
> In reading other websites I have found that the error above:
> An invalid character was found in text content.
> You will get this error message if a character in the XML document does not
> match the encoding attribute. Normally you will get this error message if
> your XML document contains "foreign" characters, and the file was saved with
> a single-byte encoding editor like Notepad, and no encoding attribute was
> specified.
>
> The actual error is:
> Server: Msg 6603, Level 16, State 1, Procedure sp_xml_preparedocument, Line 15
> XML parsing error: An Invalid character was found in text content.
> Based on what I found on the other webisite, the only foreign character in
> my data the è in ARKTX="XXX CRèME 1x20 KG".
> Is there anyway to encode this character so I do not get a parsing error?
>
> Thank you in advance
> Eric
>
Showing posts with label invalid. Show all posts
Showing posts with label invalid. Show all posts
Tuesday, March 27, 2012
Error: An invalid character was found in text content.
Hello All,
I am currently importing datarows into a sql 2000 database. when I use my
stored procedure which contains sp_xml_preparedocument... and FROM OPENXML,
I get the error stated above in the subject heading.
In reading other websites I have found that the error above:
An invalid character was found in text content.
You will get this error message if a character in the XML document does not
match the encoding attribute. Normally you will get this error message if
your XML document contains "foreign" characters, and the file was saved with
a single-byte encoding editor like Notepad, and no encoding attribute was
specified.
The actual error is:
Server: Msg 6603, Level 16, State 1, Procedure sp_xml_preparedocument, Line
15
XML parsing error: An Invalid character was found in text content.
Based on what I found on the other webisite, the only foreign character in
my data the è in ARKTX="XXX CRèME 1x20 KG".
Is there anyway to encode this character so I do not get a parsing error?
Thank you in advance
EricI found that I have to place an xml declaration
of
<?xml version="1.0" encoding="ISO-8859-1"?>
in my XML string so the sp_xml_prepared_Document stored procedure will treat
the data as UTF-8 and not the Database's code page.
"E-Cube" wrote:
> Hello All,
> I am currently importing datarows into a sql 2000 database. when I use my
> stored procedure which contains sp_xml_preparedocument... and FROM OPENXML
,
> I get the error stated above in the subject heading.
> In reading other websites I have found that the error above:
> An invalid character was found in text content.
> You will get this error message if a character in the XML document does no
t
> match the encoding attribute. Normally you will get this error message if
> your XML document contains "foreign" characters, and the file was saved wi
th
> a single-byte encoding editor like Notepad, and no encoding attribute was
> specified.
>
> The actual error is:
> Server: Msg 6603, Level 16, State 1, Procedure sp_xml_preparedocument, Lin
e 15
> XML parsing error: An Invalid character was found in text content.
> Based on what I found on the other webisite, the only foreign character in
> my data the è in ARKTX="XXX CRèME 1x20 KG".
> Is there anyway to encode this character so I do not get a parsing error?
>
> Thank you in advance
> Eric
>sql
I am currently importing datarows into a sql 2000 database. when I use my
stored procedure which contains sp_xml_preparedocument... and FROM OPENXML,
I get the error stated above in the subject heading.
In reading other websites I have found that the error above:
An invalid character was found in text content.
You will get this error message if a character in the XML document does not
match the encoding attribute. Normally you will get this error message if
your XML document contains "foreign" characters, and the file was saved with
a single-byte encoding editor like Notepad, and no encoding attribute was
specified.
The actual error is:
Server: Msg 6603, Level 16, State 1, Procedure sp_xml_preparedocument, Line
15
XML parsing error: An Invalid character was found in text content.
Based on what I found on the other webisite, the only foreign character in
my data the è in ARKTX="XXX CRèME 1x20 KG".
Is there anyway to encode this character so I do not get a parsing error?
Thank you in advance
EricI found that I have to place an xml declaration
of
<?xml version="1.0" encoding="ISO-8859-1"?>
in my XML string so the sp_xml_prepared_Document stored procedure will treat
the data as UTF-8 and not the Database's code page.
"E-Cube" wrote:
> Hello All,
> I am currently importing datarows into a sql 2000 database. when I use my
> stored procedure which contains sp_xml_preparedocument... and FROM OPENXML
,
> I get the error stated above in the subject heading.
> In reading other websites I have found that the error above:
> An invalid character was found in text content.
> You will get this error message if a character in the XML document does no
t
> match the encoding attribute. Normally you will get this error message if
> your XML document contains "foreign" characters, and the file was saved wi
th
> a single-byte encoding editor like Notepad, and no encoding attribute was
> specified.
>
> The actual error is:
> Server: Msg 6603, Level 16, State 1, Procedure sp_xml_preparedocument, Lin
e 15
> XML parsing error: An Invalid character was found in text content.
> Based on what I found on the other webisite, the only foreign character in
> my data the è in ARKTX="XXX CRèME 1x20 KG".
> Is there anyway to encode this character so I do not get a parsing error?
>
> Thank you in advance
> Eric
>sql
Thursday, March 22, 2012
Error: 5180 - Could not open FCB for invalid file ID #
When we do a DBCC SHRINKDATABASE <dbname>, 5 on one of our high volume
databases we get following errors:
- spid333 Error: 5180, Severity: 22, State: 1
- spid333 Could not open FCB for invalid file ID <#> in database '<dbname>'.
Is there anyone here that has a hint on what is causing this.
This error stated that the file was dropped or the database was corrupted.
- Please run DBCC SHRINKDATABASE again.
- If the error shows up again, please run DBCC CHECKDB to see if the
database is corrupted.
- If the database is not corrupted, then probably there is a bug in shrink
code, you can contact PSS for further assistant.
Stephen Jiang
Microsoft SQL Server Storage Engine
This posting is provided "AS IS" with no warranties, and confers no rights.
"Tor Lynge Olsen" <TorLyngeOlsen@.discussions.microsoft.com> wrote in message
news:A5E9AA7C-6A4D-4527-A9EC-687A15216E91@.microsoft.com...
> When we do a DBCC SHRINKDATABASE <dbname>, 5 on one of our high volume
> databases we get following errors:
> - spid333 Error: 5180, Severity: 22, State: 1
> - spid333 Could not open FCB for invalid file ID <#> in database
'<dbname>'.
> Is there anyone here that has a hint on what is causing this.
>
sql
databases we get following errors:
- spid333 Error: 5180, Severity: 22, State: 1
- spid333 Could not open FCB for invalid file ID <#> in database '<dbname>'.
Is there anyone here that has a hint on what is causing this.
This error stated that the file was dropped or the database was corrupted.
- Please run DBCC SHRINKDATABASE again.
- If the error shows up again, please run DBCC CHECKDB to see if the
database is corrupted.
- If the database is not corrupted, then probably there is a bug in shrink
code, you can contact PSS for further assistant.
Stephen Jiang
Microsoft SQL Server Storage Engine
This posting is provided "AS IS" with no warranties, and confers no rights.
"Tor Lynge Olsen" <TorLyngeOlsen@.discussions.microsoft.com> wrote in message
news:A5E9AA7C-6A4D-4527-A9EC-687A15216E91@.microsoft.com...
> When we do a DBCC SHRINKDATABASE <dbname>, 5 on one of our high volume
> databases we get following errors:
> - spid333 Error: 5180, Severity: 22, State: 1
> - spid333 Could not open FCB for invalid file ID <#> in database
'<dbname>'.
> Is there anyone here that has a hint on what is causing this.
>
sql
Error: 5180 - Could not open FCB for invalid file ID #
When we do a DBCC SHRINKDATABASE <dbname>, 5 on one of our high volume
databases we get following errors:
- spid333 Error: 5180, Severity: 22, State: 1
- spid333 Could not open FCB for invalid file ID <#> in database '<dbname>'.
Is there anyone here that has a hint on what is causing this.This error stated that the file was dropped or the database was corrupted.
- Please run DBCC SHRINKDATABASE again.
- If the error shows up again, please run DBCC CHECKDB to see if the
database is corrupted.
- If the database is not corrupted, then probably there is a bug in shrink
code, you can contact PSS for further assistant.
--
Stephen Jiang
Microsoft SQL Server Storage Engine
This posting is provided "AS IS" with no warranties, and confers no rights.
"Tor Lynge Olsen" <TorLyngeOlsen@.discussions.microsoft.com> wrote in message
news:A5E9AA7C-6A4D-4527-A9EC-687A15216E91@.microsoft.com...
> When we do a DBCC SHRINKDATABASE <dbname>, 5 on one of our high volume
> databases we get following errors:
> - spid333 Error: 5180, Severity: 22, State: 1
> - spid333 Could not open FCB for invalid file ID <#> in database
'<dbname>'.
> Is there anyone here that has a hint on what is causing this.
>
databases we get following errors:
- spid333 Error: 5180, Severity: 22, State: 1
- spid333 Could not open FCB for invalid file ID <#> in database '<dbname>'.
Is there anyone here that has a hint on what is causing this.This error stated that the file was dropped or the database was corrupted.
- Please run DBCC SHRINKDATABASE again.
- If the error shows up again, please run DBCC CHECKDB to see if the
database is corrupted.
- If the database is not corrupted, then probably there is a bug in shrink
code, you can contact PSS for further assistant.
--
Stephen Jiang
Microsoft SQL Server Storage Engine
This posting is provided "AS IS" with no warranties, and confers no rights.
"Tor Lynge Olsen" <TorLyngeOlsen@.discussions.microsoft.com> wrote in message
news:A5E9AA7C-6A4D-4527-A9EC-687A15216E91@.microsoft.com...
> When we do a DBCC SHRINKDATABASE <dbname>, 5 on one of our high volume
> databases we get following errors:
> - spid333 Error: 5180, Severity: 22, State: 1
> - spid333 Could not open FCB for invalid file ID <#> in database
'<dbname>'.
> Is there anyone here that has a hint on what is causing this.
>
Error: 5180 - Could not open FCB for invalid file ID #
When we do a DBCC SHRINKDATABASE <dbname>, 5 on one of our high volume
databases we get following errors:
- spid333 Error: 5180, Severity: 22, State: 1
- spid333 Could not open FCB for invalid file ID <#> in database '<dbname>
'.
Is there anyone here that has a hint on what is causing this.This error stated that the file was dropped or the database was corrupted.
- Please run DBCC SHRINKDATABASE again.
- If the error shows up again, please run DBCC CHECKDB to see if the
database is corrupted.
- If the database is not corrupted, then probably there is a bug in shrink
code, you can contact PSS for further assistant.
Stephen Jiang
Microsoft SQL Server Storage Engine
This posting is provided "AS IS" with no warranties, and confers no rights.
"Tor Lynge Olsen" <TorLyngeOlsen@.discussions.microsoft.com> wrote in message
news:A5E9AA7C-6A4D-4527-A9EC-687A15216E91@.microsoft.com...
> When we do a DBCC SHRINKDATABASE <dbname>, 5 on one of our high volume
> databases we get following errors:
> - spid333 Error: 5180, Severity: 22, State: 1
> - spid333 Could not open FCB for invalid file ID <#> in database
'<dbname>'.
> Is there anyone here that has a hint on what is causing this.
>
databases we get following errors:
- spid333 Error: 5180, Severity: 22, State: 1
- spid333 Could not open FCB for invalid file ID <#> in database '<dbname>
'.
Is there anyone here that has a hint on what is causing this.This error stated that the file was dropped or the database was corrupted.
- Please run DBCC SHRINKDATABASE again.
- If the error shows up again, please run DBCC CHECKDB to see if the
database is corrupted.
- If the database is not corrupted, then probably there is a bug in shrink
code, you can contact PSS for further assistant.
Stephen Jiang
Microsoft SQL Server Storage Engine
This posting is provided "AS IS" with no warranties, and confers no rights.
"Tor Lynge Olsen" <TorLyngeOlsen@.discussions.microsoft.com> wrote in message
news:A5E9AA7C-6A4D-4527-A9EC-687A15216E91@.microsoft.com...
> When we do a DBCC SHRINKDATABASE <dbname>, 5 on one of our high volume
> databases we get following errors:
> - spid333 Error: 5180, Severity: 22, State: 1
> - spid333 Could not open FCB for invalid file ID <#> in database
'<dbname>'.
> Is there anyone here that has a hint on what is causing this.
>
Monday, March 19, 2012
Error: 17805, Severity: 20, State: 3 Invalid buffer received from client.
Howdy Folks,
Our site has been experiencing this issue for a couple of months now.. Hopefully someone else can assist, as Ive got to a point where I think issue lies within the application or a Microsoft bug. Web searches have reveled a number installations that have also had this error but its has not revealed an actual fix.
I understand this error code basically means data being returned to the client is getting either corrupted or the data is too large to fit into the buffer on the client side. Client in our case is the terminal server, here after called a application server
As the user base has increased form 5 to 20, I have noticed that the issue is occurring more frequently in comparison to when the company first started using the application /database. Its just about daily now...
The db server also has 8 other db's residing on it - but they are all less than 300 meg.
The attached PowerPoint doc has the trace info & the surrounding code for each process that has suffered a buffer error over a period of a week.
DB Server Environment: Win2000 SP4, SQL2000 SP3a, MDAC 2.7 SP1 refresh.
Application Environment: Written In house in VB.NET Framework 1.1 setup as a published app on a terminal server running windows 2000 SP4
Common features of the issue, that have been omitted from trace output for visibility reasons are:
- Involves 1 particular DB (thats accessed by VB app) & its developement db
- All connections are coming from 1 application server
- Issue does not relate to any particular site connecting to the application server using this application
I have reviewed & fixed several potential server side causes but this error still is occuring with in the environment:
MDAC versions must be common on application & server:
- Removed from equation by updating MDAC version on App server to be the same as DB Server: 2.7 SP1 Refresh
Network related
- Considered unlikely; we are also not experiencing network card errors on either server; also all db's would be experiencing connectivity errors.
Which leaves us with Application related options to review:
- Compilation error of application
- App parameter definitions to stored procedures are the correct data type
- Ensure values being passed do not exceed 4000 characters as that has also been known to create this error message
- I've asked the developer to review MS KB 827366 article, as it may be a valid test
- In regard to MSKB 832977 - I am not using pssdiag & have a later version of the MS Analyzer. But what I thought was interesting, is the statement that this problem occurs more frequently when an application submits a large remote procedure call (RPC) input buffer, especially when the RPC input buffer is greater than or equal to 8 KB. However, this problem may occur even if the input buffer is less than 4 KB
- A is using datatypes varchar & char - not nvarchar & nhar
Any assistance with this issue would be appreicated as server performance is being effected - these processes hang around for 1 - 5 mins before terminating (refer duration times in the powerpoint traces)
Thanks In advance
Suze.I think Reads column referrs to physical reads. If that's the case then the number is pretty high and may be the reason for the client timeout. Sporadic behavior of the same query may be caused by inconsistent execution plan generated. Do you use dynamic SQL a lot?|||Thank you for your question...
The number of reads appears only on the first slide, the other 7 don't have any reads - just the really long duration.
Because of this long duration & the audit logout entry for the same process id directly after the buffer error, I've assumed that the process is timing out. But in saying that users are not reporting that they have been kicked out of the application or receiving any error messages - so maybe way off in that assumption.
We are using SP's passing in parameter's. The developer reckons this means its not being built at runtime. As you might be able to tell, I'm a newbie - so I don't know if this means they are dynamic sql or not... are you able to advise.
Best Regards|||The 4000-limit was revealed in my previous environment when SP3 was applied. The FE code was...of course, JAVA, what else can cause this. And they were parsing the call to the stored procedure without TYPEing the parameters, which resulted in every character-based parameter to be interpreted as NVARCHAR. Now, the article (827366) is also referring to the possibility of data type size misalignment, where the value supplied may be outside of the boundaries allowed for a specific data type (just a hunch).|||I like the sound of your hunch. Unfortunately I can't provide the developer any proof - being a newbie in all. Anyway, I think I've done the next best thing by sending the developer the MSKB article 827366 again & Ant profiler to use so he can see what his code is doing - hopefully this will give him the visibility he needs.
Thanks again & Best Regards
Suze.
Our site has been experiencing this issue for a couple of months now.. Hopefully someone else can assist, as Ive got to a point where I think issue lies within the application or a Microsoft bug. Web searches have reveled a number installations that have also had this error but its has not revealed an actual fix.
I understand this error code basically means data being returned to the client is getting either corrupted or the data is too large to fit into the buffer on the client side. Client in our case is the terminal server, here after called a application server
As the user base has increased form 5 to 20, I have noticed that the issue is occurring more frequently in comparison to when the company first started using the application /database. Its just about daily now...
The db server also has 8 other db's residing on it - but they are all less than 300 meg.
The attached PowerPoint doc has the trace info & the surrounding code for each process that has suffered a buffer error over a period of a week.
DB Server Environment: Win2000 SP4, SQL2000 SP3a, MDAC 2.7 SP1 refresh.
Application Environment: Written In house in VB.NET Framework 1.1 setup as a published app on a terminal server running windows 2000 SP4
Common features of the issue, that have been omitted from trace output for visibility reasons are:
- Involves 1 particular DB (thats accessed by VB app) & its developement db
- All connections are coming from 1 application server
- Issue does not relate to any particular site connecting to the application server using this application
I have reviewed & fixed several potential server side causes but this error still is occuring with in the environment:
MDAC versions must be common on application & server:
- Removed from equation by updating MDAC version on App server to be the same as DB Server: 2.7 SP1 Refresh
Network related
- Considered unlikely; we are also not experiencing network card errors on either server; also all db's would be experiencing connectivity errors.
Which leaves us with Application related options to review:
- Compilation error of application
- App parameter definitions to stored procedures are the correct data type
- Ensure values being passed do not exceed 4000 characters as that has also been known to create this error message
- I've asked the developer to review MS KB 827366 article, as it may be a valid test
- In regard to MSKB 832977 - I am not using pssdiag & have a later version of the MS Analyzer. But what I thought was interesting, is the statement that this problem occurs more frequently when an application submits a large remote procedure call (RPC) input buffer, especially when the RPC input buffer is greater than or equal to 8 KB. However, this problem may occur even if the input buffer is less than 4 KB
- A is using datatypes varchar & char - not nvarchar & nhar
Any assistance with this issue would be appreicated as server performance is being effected - these processes hang around for 1 - 5 mins before terminating (refer duration times in the powerpoint traces)
Thanks In advance
Suze.I think Reads column referrs to physical reads. If that's the case then the number is pretty high and may be the reason for the client timeout. Sporadic behavior of the same query may be caused by inconsistent execution plan generated. Do you use dynamic SQL a lot?|||Thank you for your question...
The number of reads appears only on the first slide, the other 7 don't have any reads - just the really long duration.
Because of this long duration & the audit logout entry for the same process id directly after the buffer error, I've assumed that the process is timing out. But in saying that users are not reporting that they have been kicked out of the application or receiving any error messages - so maybe way off in that assumption.
We are using SP's passing in parameter's. The developer reckons this means its not being built at runtime. As you might be able to tell, I'm a newbie - so I don't know if this means they are dynamic sql or not... are you able to advise.
Best Regards|||The 4000-limit was revealed in my previous environment when SP3 was applied. The FE code was...of course, JAVA, what else can cause this. And they were parsing the call to the stored procedure without TYPEing the parameters, which resulted in every character-based parameter to be interpreted as NVARCHAR. Now, the article (827366) is also referring to the possibility of data type size misalignment, where the value supplied may be outside of the boundaries allowed for a specific data type (just a hunch).|||I like the sound of your hunch. Unfortunately I can't provide the developer any proof - being a newbie in all. Anyway, I think I've done the next best thing by sending the developer the MSKB article 827366 again & Ant profiler to use so he can see what his code is doing - hopefully this will give him the visibility he needs.
Thanks again & Best Regards
Suze.
Error: 17805, Severity: 20, State: 3
We are getting the following messages sporadically in the Event Viewer:
Error: 17805, Severity: 20, State: 3
Invalid buffer received from client.
Error: 17803, Severity: 20, State: 12
Insufficient memory available.
We are running SQL Server 2000 SP4 on Windows Server 2003 SP1 with 4Gb RAM
without AWE enabled; however, we do have the -g256 startup parameter.
Any help would be greatly appreciated,
JamesHave a look here:
http://support.microsoft.com/kb/891719
Andrew J. Kelly SQL MVP
"James" <James@.discussions.microsoft.com> wrote in message
news:75855665-46E4-4429-9B11-0B5C92773451@.microsoft.com...
> We are getting the following messages sporadically in the Event Viewer:
> Error: 17805, Severity: 20, State: 3
> Invalid buffer received from client.
> Error: 17803, Severity: 20, State: 12
> Insufficient memory available.
> We are running SQL Server 2000 SP4 on Windows Server 2003 SP1 with 4Gb RAM
> without AWE enabled; however, we do have the -g256 startup parameter.
> Any help would be greatly appreciated,
> James|||Refer
http://support.microsoft.com/default.aspx?scid=kb;en-us;896373
http://support.microsoft.com/kb/891719
--
Thanks & Rate the Postings.
-Ravi-
"James" wrote:
> We are getting the following messages sporadically in the Event Viewer:
> Error: 17805, Severity: 20, State: 3
> Invalid buffer received from client.
> Error: 17803, Severity: 20, State: 12
> Insufficient memory available.
> We are running SQL Server 2000 SP4 on Windows Server 2003 SP1 with 4Gb RAM
> without AWE enabled; however, we do have the -g256 startup parameter.
> Any help would be greatly appreciated,
> James
Error: 17805, Severity: 20, State: 3
Invalid buffer received from client.
Error: 17803, Severity: 20, State: 12
Insufficient memory available.
We are running SQL Server 2000 SP4 on Windows Server 2003 SP1 with 4Gb RAM
without AWE enabled; however, we do have the -g256 startup parameter.
Any help would be greatly appreciated,
JamesHave a look here:
http://support.microsoft.com/kb/891719
Andrew J. Kelly SQL MVP
"James" <James@.discussions.microsoft.com> wrote in message
news:75855665-46E4-4429-9B11-0B5C92773451@.microsoft.com...
> We are getting the following messages sporadically in the Event Viewer:
> Error: 17805, Severity: 20, State: 3
> Invalid buffer received from client.
> Error: 17803, Severity: 20, State: 12
> Insufficient memory available.
> We are running SQL Server 2000 SP4 on Windows Server 2003 SP1 with 4Gb RAM
> without AWE enabled; however, we do have the -g256 startup parameter.
> Any help would be greatly appreciated,
> James|||Refer
http://support.microsoft.com/default.aspx?scid=kb;en-us;896373
http://support.microsoft.com/kb/891719
--
Thanks & Rate the Postings.
-Ravi-
"James" wrote:
> We are getting the following messages sporadically in the Event Viewer:
> Error: 17805, Severity: 20, State: 3
> Invalid buffer received from client.
> Error: 17803, Severity: 20, State: 12
> Insufficient memory available.
> We are running SQL Server 2000 SP4 on Windows Server 2003 SP1 with 4Gb RAM
> without AWE enabled; however, we do have the -g256 startup parameter.
> Any help would be greatly appreciated,
> James
Sunday, March 11, 2012
Error: "Invalid buffer received from client"
Hi,
We have a Java application with SQL 2000 db. Our
application was tested on MS SQL Server 2000 with SP3
installed (security patch MS03-031 was not installed). But
once the security patch(MS03-031) was installed, it
started giving the following error.
"2003-10-03 09:16:44.19 spid61 Error: 17805,
Severity: 20, State: 3
2003-10-03 09:35:04.46 spid68 Invalid buffer received
from client.."
on the SQL Server environment. This error is not
consistent. Now and then it is happening.
DB Server : SQL Server 2000 SP3 + MS03-031OS : :
Windows 2000 (Build 2195: Service Pack 2)We are using
JRUN/Tomcat as application server and using Microsoft JDBC
Driver Type 4 for connecting to the SQL Server. Our whole
application is on J2EE Architecture.
Please let me know if any of you have any solution for
this.
Thanks in advance.
Regards,
JPI had a quick search on Microsoft and found this :-
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q236447
not sure it will help as it was written for SQL 6.5. Worth a read though.
HTH
Ryan Waight, MCDBA, MCSE
"JP" <jobtechie@.yahoo.com> wrote in message
news:0faf01c38cd5$3282a010$a301280a@.phx.gbl...
> Hi,
> We have a Java application with SQL 2000 db. Our
> application was tested on MS SQL Server 2000 with SP3
> installed (security patch MS03-031 was not installed). But
> once the security patch(MS03-031) was installed, it
> started giving the following error.
> "2003-10-03 09:16:44.19 spid61 Error: 17805,
> Severity: 20, State: 3
> 2003-10-03 09:35:04.46 spid68 Invalid buffer received
> from client.."
> on the SQL Server environment. This error is not
> consistent. Now and then it is happening.
> DB Server : SQL Server 2000 SP3 + MS03-031OS : :
> Windows 2000 (Build 2195: Service Pack 2)We are using
> JRUN/Tomcat as application server and using Microsoft JDBC
> Driver Type 4 for connecting to the SQL Server. Our whole
> application is on J2EE Architecture.
> Please let me know if any of you have any solution for
> this.
> Thanks in advance.
> Regards,
> JP
We have a Java application with SQL 2000 db. Our
application was tested on MS SQL Server 2000 with SP3
installed (security patch MS03-031 was not installed). But
once the security patch(MS03-031) was installed, it
started giving the following error.
"2003-10-03 09:16:44.19 spid61 Error: 17805,
Severity: 20, State: 3
2003-10-03 09:35:04.46 spid68 Invalid buffer received
from client.."
on the SQL Server environment. This error is not
consistent. Now and then it is happening.
DB Server : SQL Server 2000 SP3 + MS03-031OS : :
Windows 2000 (Build 2195: Service Pack 2)We are using
JRUN/Tomcat as application server and using Microsoft JDBC
Driver Type 4 for connecting to the SQL Server. Our whole
application is on J2EE Architecture.
Please let me know if any of you have any solution for
this.
Thanks in advance.
Regards,
JPI had a quick search on Microsoft and found this :-
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q236447
not sure it will help as it was written for SQL 6.5. Worth a read though.
HTH
Ryan Waight, MCDBA, MCSE
"JP" <jobtechie@.yahoo.com> wrote in message
news:0faf01c38cd5$3282a010$a301280a@.phx.gbl...
> Hi,
> We have a Java application with SQL 2000 db. Our
> application was tested on MS SQL Server 2000 with SP3
> installed (security patch MS03-031 was not installed). But
> once the security patch(MS03-031) was installed, it
> started giving the following error.
> "2003-10-03 09:16:44.19 spid61 Error: 17805,
> Severity: 20, State: 3
> 2003-10-03 09:35:04.46 spid68 Invalid buffer received
> from client.."
> on the SQL Server environment. This error is not
> consistent. Now and then it is happening.
> DB Server : SQL Server 2000 SP3 + MS03-031OS : :
> Windows 2000 (Build 2195: Service Pack 2)We are using
> JRUN/Tomcat as application server and using Microsoft JDBC
> Driver Type 4 for connecting to the SQL Server. Our whole
> application is on J2EE Architecture.
> Please let me know if any of you have any solution for
> this.
> Thanks in advance.
> Regards,
> JP
Friday, March 9, 2012
error.log invalid protocol specified
I get the entries shown below in my error.log of
an msde on WinXP home.
Where does this Invalid Protocol specified for a ?
come from ?
Should i run svrnetcn.exe to configure protocols ?
Is it true, that I have to install MSDE with
DISABLENETWORKPROTOCOL=0 set to access it from
a remote site ?
2004-04-29 11:54:05.34 server Using 'SSNETLIB.DLL'
version '8.0.760'.
2004-04-29 11:54:05.34 server Invalid Protocol
specified for a
??4? instance: ?.
2004-04-29 11:54:05.34 server Invalid Protocol
specified for a
??t? instance: ?c??t?.
2004-04-29 11:54:05.34 server Invalid Protocol
specified for a
??t?y, Winsock Proxy instance: ?.
2004-04-29 11:54:05.34 spid5 Starting up
database 'model'.
2004-04-29 11:54:05.63 server SQL server listening on
192.168.1.34:
1433.
2004-04-29 11:54:05.63 server SQL server listening on
127.0.0.1:
1433.
2004-04-29 11:54:05.63 server SuperSocket Info: Bind
failed on TCP
port 1433.
2004-04-29 11:54:05.64 server SQL server listening on
192.168.1.34:
1433.
2004-04-29 11:54:05.64 server SQL server listening on
127.0.0.1:
1433.
..
hi Dominique,
"Dominique" <anonymous@.discussions.microsoft.com> ha scritto nel messaggio
news:a26601c434eb$a425b4f0$a601280a@.phx.gbl...
> I get the entries shown below in my error.log of
> an msde on WinXP home.
> Where does this Invalid Protocol specified for a ?
> come from ?
> Should i run svrnetcn.exe to configure protocols ?
> Is it true, that I have to install MSDE with
> DISABLENETWORKPROTOCOL=0 set to access it from
> a remote site ?
MSDE sp3a and MSDE release A install by default disabling all network
protocols in order to protect the installed instance from malicious external
attacks..
if you want your instance to be accessible from remote client you have to
enable network protocols at install time, via the DISABLENETWORKPROTOCOL=0
command line parameter or anabling them after install via Server Network
Utility (svrnetcn.exe)...
Andrea Montanari (Microsoft MVP - SQL Server)
http://www.asql.biz/DbaMgr.shtmhttp://italy.mvps.org
DbaMgr2k ver 0.7.0 - DbaMgr ver 0.53.0
(my vb6+sql-dmo little try to provide MS MSDE 1.0 and MSDE 2000 a visual
interface)
-- remove DMO to reply
an msde on WinXP home.
Where does this Invalid Protocol specified for a ?
come from ?
Should i run svrnetcn.exe to configure protocols ?
Is it true, that I have to install MSDE with
DISABLENETWORKPROTOCOL=0 set to access it from
a remote site ?
2004-04-29 11:54:05.34 server Using 'SSNETLIB.DLL'
version '8.0.760'.
2004-04-29 11:54:05.34 server Invalid Protocol
specified for a
??4? instance: ?.
2004-04-29 11:54:05.34 server Invalid Protocol
specified for a
??t? instance: ?c??t?.
2004-04-29 11:54:05.34 server Invalid Protocol
specified for a
??t?y, Winsock Proxy instance: ?.
2004-04-29 11:54:05.34 spid5 Starting up
database 'model'.
2004-04-29 11:54:05.63 server SQL server listening on
192.168.1.34:
1433.
2004-04-29 11:54:05.63 server SQL server listening on
127.0.0.1:
1433.
2004-04-29 11:54:05.63 server SuperSocket Info: Bind
failed on TCP
port 1433.
2004-04-29 11:54:05.64 server SQL server listening on
192.168.1.34:
1433.
2004-04-29 11:54:05.64 server SQL server listening on
127.0.0.1:
1433.
..
hi Dominique,
"Dominique" <anonymous@.discussions.microsoft.com> ha scritto nel messaggio
news:a26601c434eb$a425b4f0$a601280a@.phx.gbl...
> I get the entries shown below in my error.log of
> an msde on WinXP home.
> Where does this Invalid Protocol specified for a ?
> come from ?
> Should i run svrnetcn.exe to configure protocols ?
> Is it true, that I have to install MSDE with
> DISABLENETWORKPROTOCOL=0 set to access it from
> a remote site ?
MSDE sp3a and MSDE release A install by default disabling all network
protocols in order to protect the installed instance from malicious external
attacks..
if you want your instance to be accessible from remote client you have to
enable network protocols at install time, via the DISABLENETWORKPROTOCOL=0
command line parameter or anabling them after install via Server Network
Utility (svrnetcn.exe)...
Andrea Montanari (Microsoft MVP - SQL Server)
http://www.asql.biz/DbaMgr.shtmhttp://italy.mvps.org
DbaMgr2k ver 0.7.0 - DbaMgr ver 0.53.0
(my vb6+sql-dmo little try to provide MS MSDE 1.0 and MSDE 2000 a visual
interface)
-- remove DMO to reply
Error... Invalid object name data1.
I have a db that has a table x in it called data1
I have a program that does to things, updates values in the data1
table and also inserts new rows into this table. The update existing
values works great. Then when the insert loop runs, I get this error
on the following line.
insert into data1 ('AdminManageLogIn','Password') Values ('123','222')
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'data1'.
I am connected to the table x in the earlier step, I do the update
and all is fine then I change the sql statement to
insert into data1 ('AdminManageLogIn','Password') Values ('123','222')
and it gives me this error.
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'data1'.
Thanks in advance for your assistance.
Dean-OIf you are sure you are in the right database then I would look at WHO owns
data1. For your statement to work it either needs to be you ir dbo.
Anybody else and it will throw your error.
--
--
Allan Mitchell MCSE,MCDBA, (Microsoft SQL Server MVP)
www.SQLDTS.com - The site for all your DTS needs.
www.konesans.com - Consultancy from the people who know
"rockie12" <rockie12@.dtnspeed.net> wrote in message
news:d10dd1b6.0407190412.104bb5dd@.posting.google.c om...
> I have a db that has a table x in it called data1
> I have a program that does to things, updates values in the data1
> table and also inserts new rows into this table. The update existing
> values works great. Then when the insert loop runs, I get this error
> on the following line.
> insert into data1 ('AdminManageLogIn','Password') Values ('123','222')
> Server: Msg 208, Level 16, State 1, Line 1
> Invalid object name 'data1'.
> I am connected to the table x in the earlier step, I do the update
> and all is fine then I change the sql statement to
> insert into data1 ('AdminManageLogIn','Password') Values ('123','222')
> and it gives me this error.
> Server: Msg 208, Level 16, State 1, Line 1
> Invalid object name 'data1'.
> Thanks in advance for your assistance.
> Dean-O|||"rockie12" <rockie12@.dtnspeed.net> wrote in message
news:d10dd1b6.0407190412.104bb5dd@.posting.google.c om...
> I have a db that has a table x in it called data1
> I have a program that does to things, updates values in the data1
> table and also inserts new rows into this table. The update existing
> values works great. Then when the insert loop runs, I get this error
> on the following line.
> insert into data1 ('AdminManageLogIn','Password') Values ('123','222')
> Server: Msg 208, Level 16, State 1, Line 1
> Invalid object name 'data1'.
> I am connected to the table x in the earlier step, I do the update
> and all is fine then I change the sql statement to
> insert into data1 ('AdminManageLogIn','Password') Values ('123','222')
> and it gives me this error.
> Server: Msg 208, Level 16, State 1, Line 1
> Invalid object name 'data1'.
> Thanks in advance for your assistance.
> Dean-O
First., you should remove the quotes around your column names:
insert into data1 (AdminManageLogIn,Password) Values ('123','222')
You should also check the owner of the object - it's always good practice to
qualify the object name with its owner:
insert into dbo.data1 (AdminManageLogIn,Password) Values ('123','222')
Finally, another possibility is that your database is case-sensitive and the
correct object name is Data1 (or whatever) not data1.
Simon
Wednesday, March 7, 2012
error with scale-out web server: Invalid object name
We are adding a second web server to our farm. Reporting Services is installed on one web server as Rpt01 instance and works just fine. We have installed the second web server also with an instance named Rpt01 and are now trying to configure to re-use the same database as the first server. When we restart services we get the error listed below.
I was wondering if there was an issue with the same named instances on two different web servers accessing the same ReportServer01 database? This is the error that we are getting. Any help would be appreciated. The curious thing is that our databases are named ReportServer01 and ReportServer01TempDB and not the name listed below.
ReportingServicesService!schedule!4!1/23/2007-15:40:20:: Unhandled exception caught in Scheduling maintenance thread: System.Data.SqlClient.SqlException: Invalid object name 'ReportServerTempDB.dbo.ExecutionCache'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.SchedulePollWorker.ClearConsistancyFlag()
at Microsoft.ReportingServices.Library.SchedulePollWorker.CheckScheduleConsistancy(Object state)
Thanks for the response. The first instance may have had some schedules created but the second one was installed and configured immediately. I have uninstalled the second instance and reinstalled but am getting exact same issue. I used a different instance name this time, Rpt02, just so I could see reference differences.
Also when I uninstalled the second web server instance, it was never removed from the initialized list of the farm. I try to manually remove it using the Config tool and it gives an unknown error has occurred message. After reinstalling the second instance I am able to successfully add it to the initialized list. Still a little worried that an instance that no longer exists still appears in the list...
|||The uninstalled instance appearing in the initialization list should not be any problem. Are the schedules firing correctly now?|||No. Strangest thing... We can't get any subscriptions to work on this installation. We can create subscriptions and I see that the sql agent runs the scheduled job but then nothing else happens. No errors are logged and no mail arrives.|||I am now being told that if you rename your ReportServer database (which I did) and then set configuration to this database that this error could occur. I'm looking for the correct steps for renaming your ReportServer database. If anyone has them could you share? I will probably go back to the old name since it sounds like I am stuck with that name.|||The problem has been fixed. I found one trigger in the ReportServer01 database that was referencing the old ReportServerTempDB database. I corrected the name and all is good now.
I'm told that we shouldn't change our database name after the ReportServer database has been created so I will follow that for future. Here's the trigger that I had to change.
CREATE TRIGGER [Schedule_UpdateExpiration] ON [dbo].[Schedule]
AFTER UPDATE
AS
UPDATE
EC
SET
AbsoluteExpiration = I.NextRunTime
FROM
[ReportServerTempDB].dbo.ExecutionCache AS EC
INNER JOIN ReportSchedule AS RS ON EC.ReportID = RS.ReportID
INNER JOIN inserted AS I ON RS.ScheduleID = I.ScheduleID AND RS.ReportAction = 3
GO
Error with Registering a SQL Server 2000.
Anyone heard of this error when attempting to Register a
SQL Server from Enterprise Manager Standard 2000 client.
Invalid attribute/Option Identifier. If so, how have you
resolved it?
The error is usually related to an MDAC issue. Try
reapplying SP3a.
-Sue
On Wed, 24 Mar 2004 12:58:00 -0800, "Jackson_Greg"
<anonymous@.discussions.microsoft.com> wrote:
>Anyone heard of this error when attempting to Register a
>SQL Server from Enterprise Manager Standard 2000 client.
>Invalid attribute/Option Identifier. If so, how have you
>resolved it?
SQL Server from Enterprise Manager Standard 2000 client.
Invalid attribute/Option Identifier. If so, how have you
resolved it?
The error is usually related to an MDAC issue. Try
reapplying SP3a.
-Sue
On Wed, 24 Mar 2004 12:58:00 -0800, "Jackson_Greg"
<anonymous@.discussions.microsoft.com> wrote:
>Anyone heard of this error when attempting to Register a
>SQL Server from Enterprise Manager Standard 2000 client.
>Invalid attribute/Option Identifier. If so, how have you
>resolved it?
Error with Registering a SQL Server 2000.
Anyone heard of this error when attempting to Register a
SQL Server from Enterprise Manager Standard 2000 client.
Invalid attribute/Option Identifier. If so, how have you
resolved it?The error is usually related to an MDAC issue. Try
reapplying SP3a.
-Sue
On Wed, 24 Mar 2004 12:58:00 -0800, "Jackson_Greg"
<anonymous@.discussions.microsoft.com> wrote:
>Anyone heard of this error when attempting to Register a
>SQL Server from Enterprise Manager Standard 2000 client.
>Invalid attribute/Option Identifier. If so, how have you
>resolved it?
SQL Server from Enterprise Manager Standard 2000 client.
Invalid attribute/Option Identifier. If so, how have you
resolved it?The error is usually related to an MDAC issue. Try
reapplying SP3a.
-Sue
On Wed, 24 Mar 2004 12:58:00 -0800, "Jackson_Greg"
<anonymous@.discussions.microsoft.com> wrote:
>Anyone heard of this error when attempting to Register a
>SQL Server from Enterprise Manager Standard 2000 client.
>Invalid attribute/Option Identifier. If so, how have you
>resolved it?
Subscribe to:
Posts (Atom)